
For how long does the Osmium-Institut zur Inverkehrbringung und Zertifizierung von Osmium GmbH (Osmium-Institute Germany) have the worldwide license from the Swiss crystallizer to certify and distribute osmium? In other words, how big is the risk that there will suddenly be a different channel that is in competition with the market structure that we plan to establish?
There is no limitation in time, as long as the Osmium-Institute Germany complies with the law. In this case, the contract is transferred directly to the Swiss crystallization company. However, this is very unlikely since all parties involved have made it their declared goal to build a structure that is equally secure for manufacturers, retailers and customers.
It is currently not possible to copy the complicated and delicate process. What’s more, the process is dangerous in laboratory. Temperatures and pressures are extremely high and hard to control.
In fact, more than 160 individual production process steps would have to be identified and copied. First, every step takes more than 3 months, given that one knows what needs to be done and how. And second, it takes at least 40 years to master the entire process chain with almost no option to speed things up.
Dabartinės gamybos apimtys yra pakankamos esamai rinkai, o prireikus gali būti padvigubintos kas tris mėnesius. Gamybos pajėgumų koregavimas bus valdomas didėjant paklausai. Svarbiausia yra tai, kad kiekvienas pristatymas bus įvykdytas, jei yra atliktas mokėjimas, o ilgiausias pristatymo terminas gali siekti iki šešių mėnesių.
Visas šiuo metu turimas formas ir gaminius galite pamatyti adresu http://www.buy-osmium.com. Visi čia matomi gaminiai gali būti pristatyti jums vos per keletą dienų.
There exist two main markets into which osmium may be sold: Jewelry and investment.
If osmium is used for jewelry, such as an expensive ring or an exclusive watch, this osmium will be permanently taken out of the market.
This means that only osmium stemming from investments can be bought back in the future when production rates will eventually go down. This may lead to price increases, as there is less osmium available with constant or increased demand. This scenario is also referred to as the “Osmium Big Bang.”
The term Big Bang is used to describe a scenario in which prices increase very quickly. In the osmium business, this is the day when osmium can no longer be bought from mines in the future to satisfy demand. Mines have only limited osmium available.
Then, prices may increase if osmium can only be repurchased from investors. Investors may then have an opportunity to have their osmium paid at higher prices. Since from this point on no other sources are available, and since not everyone will want to sell, an extreme price rally may start.
The osmium Big Bang should not be confused with a speculative bubble (as in real estate markets, for example), as the shortage will be real at this moment and cannot be compensated.
The range of semi-manufactured products in the field of crystalline osmium is divided into four segments:
Long-term tangible investment
Crystalline osmium for investors in kind is offered for delivery in the form of high diameter investor discs, conventional discs, rectangular flat bars and squares. All of the above shapes are offered at no additional charge for processing for the price per gram only. For this reason, they are particularly well suited for long-term tangible asset investments. All mentioned shapes can be exchanged for other shapes of the same group at no cost. The process allows small pieces to be collected and converted into large pieces. Alternatively, large pieces can be exchanged for small pieces to facilitate a partial sale. Within the framework of each exchange, the volume of tangible assets can also be increased in parallel by selecting pieces that deviate upwards in weight without further expense.
Pre-cut small shapes
The second category consists of shapes that are already pre-cut for the processing industry. This category includes osmium diamonds as round shapes, osmium stars as concave stars with four corners and osmium triangles. With these objects, there is little offcut during cutting due to the geometric counter-shape, which usually occurs at the edge of a disc. The loss in processing is also low, but still worth noting due to the long circumference length in relation to the short surface area. Low processing and packaging costs are added for cut, offcut and loss.
Categorised and pre-cut custom shapes
The third category is shapes of any kind that create more offcut due to their complex shape. These include, for example, lizards, hearts, letters, shooting stars and other objects that are not capable of depicting special geometric shapes in relation to each other. These pieces are less suitable for an investment in kind and are provided to collectors and producers of luxury products and jewellery.
Non-categorised custom shapes
The fourth category is special shapes of any kind that were not yet categorised when the order was placed for production and are special orders in the first step. This category includes, for example, special inlays for special designs or logo cuts. Requests for special shapes are handled by the company Oslery GmbH. The surcharges for offcut, loss, programming, machine handling, short quantities, short production times and the creation of new certification categories are included in the price when the quotation is prepared. The price request, which is fully invoiced at the time of ordering, is 69,- € per shape. In series production of 5 pieces or more, the prices for special shapes are significantly reduced.
Since Osmium Institutes are not trading, but certification institutes, there is no buy-back. The repurchase is even prohibited by law for the institutes.
The owner must sell to a jeweler or other investor in the future. As these emerging markets grow very rapidly there are opportunities to sell later for a good price.
For this reason, there is already a trading platform for the future sale and purchase of osmium between private individuals at www.osmium-marketplace.com. The Marketplace is independent of the German Osmium Institute and belongs to the company Osmi-Safe GmbH. The Osmium Institute was on hand to advise the owners when the platform was set up and continues to do so today.
Private parties can use the site www.osmium-preis.com to set the price of a transaction.
The “osmium bet” describes a scenario where osmium investors are speculating that osmium will become even rarer, that its value will increase, and at the same time the secondary market for osmium, in which osmium is used for the manufacture of jewelry, will grow.
Moreover, these investors expect the market to be much more accessible in the future than it was a few years ago, when osmium was mostly unknown.
The decision as to which osmium piece to purchase, which semimanufactured osmium shapes to store for the next generation or which osmium jewelry to buy, should take into consideration one important factor: The shape of the semi-manufactuerd product!
When osmium is used in the jewelry industry, by a larger manufacturer or just a small jewelry business, it must be possible to cut the desired shape from an osmium disk or an osmium bar. When cutting, the osmium shapes are positioned in a way that minimizes offcuts, i.e. the osmium which can no longer be used after cutting. The reason is that the offcuts need to undergo once again the complete crystallization cycle, thus involving considerable effort.
For this reason, pure investors should rather buy finished products like Osmium Diamonds and Osmium Stars or Star Rows, because these can be resold more easily to jewelers. People who associate investment with jewelry may also purchase all other shapes. In any case, when purchasing bars or discs, it should be clear that these products are semimanufactured products which can be further cut into almost any shape. The larger their surface area, the easier it is to realize shapes without significant offcuts. These products may also be sold to other investors or banks.
In general, all investors should aim for an investment period of 10 to 15 years for the purchase of the metal. Osmium is certainly not a product for short-term and speculative trading.
The area adjacent to the outermost edge of an osmium bar inevitably turns into offcuts because this area is very difficult and often impossible to process. It is for this reason that shapes are preferably cut out from the center section of a bar. As a result, the area of the center section should be as large as possible in relation to the circumference.
This means that larger bars and disks imply less offcuts and are therefore more suitable for investors. It is therefore recommended to purchase the largest possible shape with the funds available rather than purchasing two or more smaller bars.
An exception to this are pre-cut shapes such as small animal shapes, inlays, Osmium Diamonds or Star Rows. These shapes are already finished products and can be resold in that shape.
Whether a metal rises or falls in price depends solely on demand and supply. Or to put it more precisely, it depends on whether a buyer is found who is ready to pay the price you want to achieve for your metal.
This principle applies both in daily life and in macroeconomics. It is a little odd, however, that the principle is not always respected when it comes to one's own assets.
So what will probably happen to the price of osmium in different scenarios?
1. The crystallization of osmium is ceased because raw osmium is no longer available. In this case the price will surely rise, as no additional osmium can be delivered.
2. A crisis occurs and people have to leave their country. In this case an owner will take the osmium with him or her. People may buy osmium as an escape currency early enough to leave the country with the metal. The advantage of osmium is that it has the highest value density of all metals and for this reason the value of a huge villa can easily be transported in the pocket.
3. No crisis breaks out and crystallization continues. In this case, osmium will simply continue to be traded and processed into jewellery. Over time, however, two aspects will inevitably change the market. On the one hand, there will soon be no more raw osmium, so it will no longer be possible to crystallize as soon as the supply of raw osmium reaches zero. On the other hand, people lose goods and process osmium into jewellery. These pieces will never return to the market for investors. Thus, inevitably, the amount of goods asymptotically also decreases towards zero. Osmium will therefore rise in value and price in these cases.
Surely there could also be scenarios which could lead to falling osmium prices in special situations. However, the market seems to reflect this in such a way that only temporary sales of a significant amount of osmium can be thought of.
Diamonds are forever. This was once upon a time the main slogan of the Dutch company DeBeers, which has been controlling the diamond market for decades with a huge market share.
Of course, this is not true, because diamonds burn in fire just like a piece of wood. On the other hand, they are subject to the myth of being incredibly rare. That is why people believe that diamonds have value. However, to be honest, they are absolutely beautiful.
If one can believe undefined sources, the blood diamond issue was also thrown into the market by a company in order to undermine competitors. This is absolutely conceivable, because companies of this size can be incredibly brutal in the marke. They can, after all, to a large extent control an entire market, precisely because they have foresight. And also because they can finance campaigns to achieve their goals with a lot of money, perseverance and good marketing. Only in this way, and for the sake of visibility, CocaCola has invented Santa Claus and spread it around the world. After all, we are all buying a brown soft drink now, even in the cold season. Ingenious.
However, the diamond market has changed dramatically. With the introduction of artificial diamonds to the market, DeBeers was confronted with competition. Therefore, the company has put the technology of diamond growing, which they have mastered for decades, in the right light and now sell man made diamonds with moderate success. It was even achieved by the lobbyists of the company that the diamonds do not have to be given an identifier. This is particularly perfidious sine if you own diamonds in your family heritage, they are suddenly worth nothing, because they have the same value as synthetic diamonds. Nobody can hardly see the difference.
It is also interesting that DeBeers offers a machine that can find a miniature difference in the layering of the crystals. The funny thing is that the intention is to detect a worse quality with natural diamonds. So, the new marketing strategy is: Hello clients, please purchase the new synthetic diamonds for less money, but please buy more individual pieces. This enables them to argue that they do not need to dig any more holes in the earth for the sake of the conservation of nature. On the other hand, they are attacking all companies like Swarovski, which sell cheap trinkets as expensive stones. Now the diamond has suddenly become so cheap that it can be used in costume jewellery.
It is interesting to take a closer look at the raw materials market, because carbon is one of the cheapest materials ever, considering that it can be used to produce diamonds atom by atom. In fact, the raw material is so cheap that people produce it themselves. With each breath, a human being produces 80 micrograms of carbon dioxide from the food he ingests by processing it in his body. The mass fraction in carbon dioxide is 12u to 32u between carbon and the two oxygen atoms involved. So in relation to the whole molecule with 12u to 44u (this is the so-called molar mass) about a quarter. Thus our lungs exhale a quantity of about 20 micrograms of carbon per breath.
If we assume that we need 0.2 grams for one carat, this would take us 10,000 breaths. We breath every four seconds. This gives us a number of 40,000 seconds to exhale one carat. After 11 hours the diamond is ready. If we now estimate the costs that will presumably be used in plasma for crystal growing, then in addition to our zero euros for carbon, there are also a few euros for electricity and the machine. That's how the poor company DeBeers still earns a a lot.
For this reason, it is simply better to buy the unforgeable and unmistakable osmium diamonds.
The BEATE - procedure is comparable to a real estate search procedure by an estate agency. We want it to be possible to search for special shapes and cut variations as well as goods from private hands in the circle of owners of crystalline osmium, in order to be acquired by private individuals at a reduced price. The term is an acronym that stands for "Beschaffung Eingetragener Areabespoke Teile und Elemente" (German for "Procurement of Registered Areabespoke Parts and Elements"). The procedure serves the purpose of finding defined parts and also elements, i.e. inlays, which would have to be manufactured at great expense, but which are already available ready-made in the hands of a customer who may be willing to sell.
In more recent times, the BEATE procedure has developed into the so-called Osmium Marketplace, which regulates buying and selling between private individuals and provides the necessary contracts. Of importance is the post-certification by osmium institutes, which serves to secure authenticity for the buyer when buying from private hands.
The procedure also applies to enquiries from partners with special status or special projects in the field of marketing, who have to work with goods provided free of charge, either as consignment goods or as free goods. The goods are either provided as a demonstration object to be displayed or they can be sold by the partner. His higher profit is intended to be used for his marketing work.